Cleaning
Sensor Swab PEC-12 (946ml) filmcleaner
- universally applicable bellows
- cleans dusty Lens gently and reliably
NiSi Bicolor Blower large bellows
- 12 swabs in 17mm for sensor cleaning
- 10ml optical cleaning fluid
- 10 special cotton swabs for sensor + contact cleaning
- 5 dry cleaning wipes
- including a practical storage bag
eyelead Photo Cleaning Set Classic
Sensor Swab PEC*PAD 4 x4 x100 sheets photo wipe
Free live consultation
Your individual consultation - from the comfort of your sofa
- Caruba Lens Blower
- for cleaning your equipment
Caruba Bellows blister blister
- Caruba Cleaning Kit All-in-One CB-CK1
- Cleaning kit is an ideal tool
- To keep equipment free from dust, grease and dirt
- with lens blower, retractable lens brush, 20x pre-moistened cloths, cleaning spray (alcohol-free 30 ml), microfiber cloth
Caruba Cleaning Kit All in One
- VISIBLEDUST Sensor Clean cleaning solution
- Filling quantity: 8ml
- Cleaning solution for removing water stains from the camera sensor
- has an antistatic effect
- prevents dust adhesion and condensation
- alcohol-free, particularly gentle and leaves no streaks
- is suitable for the Green Series swabs
VISIBLEDUST Sensor Clean cleaning solution 8ml
- Kaiser Kinetronics antistatic brushes Static-Wisk
- Cleaning brush without ground wire
- clean sensitive surfaces while simultaneously dissipating existing static charge
- consists of a mixture of highly flexible natural fibers and conductive synthetic fibers
- Removes dust from films or Lens without risk to the coating
- Brushes can be washed out without affecting the antistatic effect
Kaiser Antistatic brush SW-
-
100, 100 mm
Dieser Artikel wird exklusiv für Sie bestellt.
-
101, 100 mm mit Erdleitung
Dieser Artikel wird exklusiv für Sie bestellt.
-
140, 140 mm
Dieser Artikel wird exklusiv für Sie bestellt.
-
141, 140 mm mit Erdungskabel
Dieser Artikel wird exklusiv für Sie bestellt.
- Modern cleaning pen
- for all smaller optical surfaces such as eyepiece lenses, binocular lenses, filters etc.
- thanks to a special, non-liquid cleaning element, this cleaning pen lasts forever as it cannot dry out
- it is combined with a retractable dust brush
Celestron LensPen - Cleaning Pen
- NiSi cleaning pen
- Filter cleaner for square filters
- environmentally friendly material
- specially developed for cleaning rectangular filters
- easy handling
- Special formula for cleaning salt water stains, oil stains, fingerprints etc.
- can also be used to clean LCD displays, cell phones, tablets or notebooks
NiSi Filter cleaning pin (NS-CE)
- For cleaning Lenses, eyeglass lenses, Scanner lenses, binoculars
- Also suitable for plastic lenses The set contains in a sturdy plastic box:
- 58 ml (2 oz) cleaning liquid in pump spray bottle
- Antistatic cleaning cloth Panther Cloth
Kinetronics LCK
- Green Clean Top Valve V-2000
- for use with Sensor Cleaning Kit or compressed air can Hi Tech 400 ml optional
Green Clean Top valve V-2000
- Dörr cleaning set CK-05
- 5-piece in blister pack
- Cleaning set for perfect cleaning of camera equipment
Dörr Cleaning set CK-05 5-piece in blister pack
- 15x SensorSafe cleaning pins for 24 mm sensors
- each rod head is wrapped in a soft, lint-free, sterile fabric
- double-sided and wrapped to absorb excess liquid
- for coated and non-coated sensors
- Cleaning instructions included
Delkin SensorSafe Cleaning Swabs
- SENSOR SWAB Ultra Swab Type 3 (12 box)
- especially for camera sensors
- Cleaning of full-frame CCD and CMOS sensors of digital cameras
- Attention: not suitable for Canon EOS 5D MK IV, 5D s, 5Ds R and 1DX MK II cameras!
Sensor Swab Ultra Swab (12 box)
Meaning of the delivery status
Immediately available
The item is in stock and can be shipped at short notice.
The item is also in stock in our shop in Düsseldorf.
Am Außenlager. Lieferzeit 4-6 Werktage nach Zahlungseingang
Der Artikel ist vor Ort in unserem Hauslager nicht vorrätig und wird nach erteiltem Kundenauftrag am Außenlager/beim Hersteller bzw. Distributor bestellt. Die zu erwartende Lieferzeit beträgt 4-6 Werktage.
Item has been ordered
The item has already been ordered from the manufacturer or distributor. The delivery time is usually between 1 week and 2 months. As soon as a more precise delivery time is known, we will publish the details on our website. After placing the order, you will be informed regularly about the delivery time.
Available at a specified date
The item has already been ordered from the manufacturer or distributor. We have been informed of the expected delivery date.
This item is ordered exclusively for you
The item is currently not in stock and will be ordered for you from the manufacturer or distributor after you have placed an order. The delivery time is usually between 1 week and 2 months. After placing the order, you will be informed regularly about the delivery time.
Item has been ordered. Delivery time 1-3 months
The item is currently not available. We were not given a delivery time. Experience shows that the expected delivery time is 1-3 months.
Currently not available
The manufacturer or supplier cannot confirm a date, so we assume a waiting time of 2 to 9 months. You can still order the item and secure your place on the waiting list.
Please note: Despite updating our website regularly, it is possible that an item may be out of stock but shown as available for a short time, especially when orders are high. All information is therefore without guarantee. We will inform you immediately if there is a delay in the expected availability/delivery time. The availability information refers to an order quantity of 1. Availability may vary for higher order quantities.